Difference between revisions of "SPI connector pinout"
Jump to navigation
Jump to search
(Created page with '= SPI connector pinout = For the interconnect between the SPI masters and the SPI expansion boards BitWizard uses a 6-pin SPI cable. The pinout is the same (or very similar) t…') |
|||
| Line 1: | Line 1: | ||
= SPI connector pinout = |
|||
For the interconnect between the SPI masters and the SPI expansion boards BitWizard uses a 6-pin SPI cable. |
For the interconnect between the SPI masters and the SPI expansion boards BitWizard uses a 6-pin SPI cable. |
||
Revision as of 17:13, 7 February 2012
For the interconnect between the SPI masters and the SPI expansion boards BitWizard uses a 6-pin SPI cable.
The pinout is the same (or very similar) to the pinout of the 6-pin ICSP programming connector that lots of AVR boards have.
| pin | function | remark |
|---|---|---|
| 1 | MISO | Master In Slave Out |
| 2 | VCC | power |
| 3 | SCK | Shift Clock |
| 4 | MOSI | Master Out Slave In. |
| 5 | SS | Slave Select |
| 6 | GND | Ground 0V |
The connector is laid out as follows:
| 1 | 2 |
| 3 | 4 |
| 5 | 6 |
The board usually has pin 1 and six marked.