Difference between revisions of "Assembling the DMX case"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
== Included == |
== Included == |
||
| ⚫ | |||
7x M3X6 6+1 screw |
7x M3X6 6+1 screw |
||
4x M2.5x10 screw |
4x M2.5x10 screw |
||
| Line 12: | Line 14: | ||
=== OLD: === |
=== OLD: === |
||
We've switched from M3 sized screws that you have to force through the RPI to M2.5 as was |
|||
| ⚫ | |||
intended by the RPI people. |
|||
10x m3x6 |
10x m3x6 |
||
4x m3x12 |
4x m3x12 |
||
Revision as of 16:00, 31 December 2023
Assembling the DMX case
Included
Included screws and spacers
7x M3X6 6+1 screw 4x M2.5x10 screw 4X M2.5X12MM (If we're our of 12mm, we'll send 16mm) M2.5x4MM spacer 4X M2.5X20MM FF spacer 4X M2.5X6MM screw
OLD:
We've switched from M3 sized screws that you have to force through the RPI to M2.5 as was intended by the RPI people.
10x m3x6 4x m3x12 4x m2.5x10 4x m3x4mm spacer 4x m3x20mm spacer
Step 1
4x m3x6 4x m3x12 4x m3x4mm spacer 4x m3x20mm spacer
Step 2
Step 3
6x m3x6 4x m2.5x10
